Datasheet4U Logo Datasheet4U.com

MAX4508 - Fault-Protected / High-Voltage Single 8-to-1/Dual 4-to-1 Multiplexers

General Description

The MAX4508/MAX4509 are 8-to-1 and dual 4-to-1 faultprotected multiplexers that are pin-compatible with the industry-standard DG508/DG509.

The MAX4508/ MAX4509 operate with dual supplies of ±4.5V to ±20V or a single supply of +9V to +36V.

Key Features

  • o ±40V Fault Protection with Power Off ±25V Fault Protection with ±15V Supplies o Rail-to-Rail Signal Handling o No Power-Supply Sequencing Required o All Channels Off with Power Off o Output Clamped to Appropriate Supply Voltage During Fault Condition o 1kΩ Output Clamp Resistance During Overvoltage o 400Ω max On-Resistance o 20ns Fault-Response Time o ±4.5V to ±20V Dual Supplies +9V to +36V Single Supply o TTL/CMOS-Compatible Logic Inputs MAX4508/MAX4509.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4520 SPST Analog Switches Maxim Integrated
MAX4524L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4525L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4534 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated
MAX4535 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX450 CMOS Video Amplifier
MAX4501 Low-Voltage / SPST / CMOS Analog Switches
MAX4502 Low-Voltage / SPST / CMOS Analog Switches
MAX4503 Low-Voltage / Dual-Supply / SPST / CMOS Analog Switches
MAX4504 Low-Voltage / Dual-Supply / SPST / CMOS Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1414; Rev 0; 1/99 Fault-Protected, High-Voltage Single 8-to-1/Dual 4-to-1 Multiplexers General Description The MAX4508/MAX4509 are 8-to-1 and dual 4-to-1 faultprotected multiplexers that are pin-compatible with the industry-standard DG508/DG509. The MAX4508/ MAX4509 operate with dual supplies of ±4.5V to ±20V or a single supply of +9V to +36V. These multiplexers feature fault-protected inputs, Rail-to-Rail® signal handling capability, and overvoltage clamping at 150mV beyond the rails. Both parts offer ±40V overvoltage protection with supplies off and ±25V protection with supplies on. Onresistance is 400 Ω max and is matched between channels to 15Ωmax.