Datasheet4U Logo Datasheet4U.com

MAX4536 - Quad / Low-Voltage / SPST Analog Switches with Enable

Download the MAX4536 datasheet PDF. This datasheet also covers the MAX variant, as both devices belong to the same quad / low-voltage / spst analog switches with enable family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX4536/MAX4537/MAX4538 are quad, low-voltage, single-pole/single-throw (SPST) analog switches with a common enable pin.

They are pin compatible with the industry-standard 74HC4316.

The MAX4536 has four normally open (NO) switches, and the MAX4537 has four normally closed (NC) switches.

Key Features

  • o Pin Compatible with 74HC4316 o ±2.0V to ±6V Dual Supplies +2.0V to +12V Single Supply o Four Separately Controlled SPST Switches with Common Enable o 100Ω Signal Paths with Dual ±5V Supplies 200Ω Signal Paths with Single +4.5V Supply o Rail-to-Rail Signal Handling o tON and tOFF = 100ns and 80ns at ±4.5V Supply o Less than 1µW Power Consumption o >2kV ESD Protection per Method 3015.7 o TTL/CMOS-Compatible Inputs o Small Packages: PDIP, QSOP, Narrow SO MAX4536/MAX4537/MAX4538 ________________.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX-4536.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4534 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated
MAX4535 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated
MAX4520 SPST Analog Switches Maxim Integrated
MAX4524L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4525L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX453 CMOS Video Multiplexer/Amplifier
MAX4530 Low-Voltage / CMOS Analog Multiplexers/Switches with Enable Inputs and Address Latching
MAX4531 CMOS Analog Multiplexers/Switches
MAX4532 CMOS Analog Multiplexers/Switches
MAX4533 Quad / Rail-to-Rail / Fault-Protected / SPDT Analog Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1148; Rev 0; 11/96 Quad, Low-Voltage, SPST Analog Switches with Enable _________________General Description The MAX4536/MAX4537/MAX4538 are quad, low-voltage, single-pole/single-throw (SPST) analog switches with a common enable pin. They are pin compatible with the industry-standard 74HC4316. The MAX4536 has four normally open (NO) switches, and the MAX4537 has four normally closed (NC) switches. The MAX4538 has two NO switches and two NC switches. These switches operate from a +2V to +12V single supply, or from ±2V to ±6V dual supplies. On-resistance (200Ω max) is matched between switches to 4Ω (max) and is flat (10Ω max) over the specified signal range. Each switch can handle rail-to-rail analog signals. The off-leakage current is only 1nA at +25°C and 10nA at +85°C.