Datasheet4U Logo Datasheet4U.com

MAX459 - 8x4 Video Crosspoint Switches

General Description

The MAX458/MAX459 are crosspoint switches with eight input channels and four high-speed, buffered output channels.

The MAX458 output buffer is configured with a gain of one, while the MAX459 buffer has a gain of two.

Key Features

  • o o o o o o o o o o 100MHz Unity-Gain Bandwidth 300V/µs Slew Rate Low 0.05° Differential Phase Error Low 0.01% Differential Gain Error Directly Drives 75Ω Cables Fast 60ns Switching Time High-Z Amplifier Output Capability Shutdown Capability 16-Bit Serial and 6-Bit Parallel Address Modes 40-Pin DIP and 44-Pin PLCC Packages MAX458/MAX459 ______________Ordering Information PART MAX458CPL MAX458CQH MAX458EPL MAX459CPL MAX459CQH MAX459EPL TEMP. RANGE 0°C to +70°C 0°C to +70°C -40°C to +85°C 0°C to.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4590 CMOS Analog Switches Maxim Integrated
MAX4592 SPST Analog Switches Maxim Integrated
MAX4593 SPST Analog Switches Maxim Integrated
MAX4594 SINGLE-CHANNEL SPST ANALOG SWITCH Texas Instruments
MAX4595 SINGLE-CHANNEL SPST ANALOG SWITCH Texas Instruments

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX4591 SPST Analog Switches
MAX4594 Low-Voltage / Single-Supply / 10 SPST CMOS Analog Switches
MAX4595 Low-Voltage / Single-Supply / 10 SPST CMOS Analog Switches
MAX4597 Low-Voltage / Single-Supply / 10 SPST CMOS Analog Switches
MAX4598 Low-Voltage / Combination Single-Ended 8-to-1/Differential 4-to-1 Multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0258; Rev 2; 4/95 NUAL KIT MA ATION U EET L H A S V A E T WS DA FOLLO 8x4 Video Crosspoint Switches with Buffers _______________General Description The MAX458/MAX459 are crosspoint switches with eight input channels and four high-speed, buffered output channels. The MAX458 output buffer is configured with a gain of one, while the MAX459 buffer has a gain of two. In each device, any one of eight input lines can be connected to any of four output amplifiers. The output buffers are capable of driving loads of 75Ω. Data interface can be accomplished by either a 16-bit serial or a 6-bit parallel connection. In the serial mode, the MAX458/MAX459 are SPITM, QSPITM, and MicrowireTM compatible. In parallel mode, the MAX458/MAX459 are compatible with most microprocessor buses.