Datasheet4U Logo Datasheet4U.com

MAX4598 - Low-Voltage / Combination Single-Ended 8-to-1/Differential 4-to-1 Multiplexer

General Description

The MAX4598 low-voltage, CMOS analog IC is a configurable single-ended 8-to-1/differential 4-to-1 multiplexer.

In addition to the input channels, both V+ and GND can be switched to the output channels, enabling the supply voltages to be monitored.

Key Features

  • o V+ and GND Can Be Switched to the Output Channels o 75Ω (max) On-Resistance o Single-Ended or Differential Operation o 2pC (typ) Charge Injection o Latched or Unlatched Operation o TTL-Compatible Logic Inputs at ±5V Supply o Handles Rail-to-Rail Analog Signals MAX4598 Ordering Information PART MAX4598CAP TEMP. RANGE 0°C to +70°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4590 CMOS Analog Switches Maxim Integrated
MAX4592 SPST Analog Switches Maxim Integrated
MAX4593 SPST Analog Switches Maxim Integrated
MAX4594 SINGLE-CHANNEL SPST ANALOG SWITCH Texas Instruments
MAX4595 SINGLE-CHANNEL SPST ANALOG SWITCH Texas Instruments

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX459 8x4 Video Crosspoint Switches
MAX4591 SPST Analog Switches
MAX4594 Low-Voltage / Single-Supply / 10 SPST CMOS Analog Switches
MAX4595 Low-Voltage / Single-Supply / 10 SPST CMOS Analog Switches
MAX4597 Low-Voltage / Single-Supply / 10 SPST CMOS Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1385; Rev 0; 10/98 Low-Voltage, Combination Single-Ended 8-to-1/Differential 4-to-1 Multiplexer General Description The MAX4598 low-voltage, CMOS analog IC is a configurable single-ended 8-to-1/differential 4-to-1 multiplexer. In addition to the input channels, both V+ and GND can be switched to the output channels, enabling the supply voltages to be monitored. The MAX4598 operates from a single +2.7V to +12V supply or from dual ±6V supplies. The device has low on-resistance (75Ω max) and TTL-compatible logic inputs from either ±5V or a single +5V supply. Each switch can handle Rail-to-Rail ® analog signals. The MAX4598 has two modes of operation: as a standard multiplexer and as a “latchable” multiplexer where the address lines are strobed. The off-leakage current is only 0.