Datasheet4U Logo Datasheet4U.com

MAX4700 - 1.25 / Dual SPST / CMOS Analog Switches

General Description

The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max.

On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range.

Each switch can handle Rail-to-Rail® analog signals.

Key Features

  • guaranteed break-before-make switching. These devices operate from a +4.5V to +36V single supply or from ±4.5V to ±20V dual supplies. A separate logic supply pin guarantees TTL/CMOS-logic compatibility while operating across the entire supply voltage range. o Low On-Resistance (1.25Ω max) o Guaranteed RON Match Between Channels (0.3Ω max) o Guaranteed RON Flatness Over Specified Signal Range (0.3Ω max) o Rail-to-Rail Signal Handling o Guaranteed Break-Before-Make (MAX4700) o +4.5V to +36V Single.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4701 (MAX4699 - MAX4702) Dual DPDT/Quad SPDT Analog Switches Maxim Integrated Products
MAX4702 (MAX4699 - MAX4702) Dual DPDT/Quad SPDT Analog Switches Maxim Integrated Products
MAX4704 4:1 Analog Multiplexer Maxim Integrated Products
MAX4708 Single 8-to-1 / Dual 4-to-1 Multiplexers Maxim Integrated
MAX4709 Single 8-to-1 / Dual 4-to-1 Multiplexers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX470 Two-Channel / Triple/Quad RGB Video Switches and Buffers
MAX471 Precision / High-Side Current-Sense Amplifiers
MAX4714 0.8 / Low-Voltage / Single-Supply SPDT Analog Switch
MAX4715 Single-Supply SPST Analog Switches
MAX4717 Dual SPDT Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1513; Rev 0; 7/99 1.25Ω, Dual SPST, CMOS Analog Switches General Description The MAX4680/MAX4690/MAX4700 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.3Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Off-leakage current is only 5nA max at +85°C. These analog switches are ideal in low-distortion applications and are the preferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have low power requirements, require less board space, and are more reliable than mechanical relays. The MAX4680 has two NC (normally closed) switches, and the MAX4690 has two NO (normally open) switches.