Datasheet4U Logo Datasheet4U.com

MAX473 - Single/Dual/Quad / 10MHz Single-Supply Op Amps

General Description

The single MAX473, dual MAX474, and quad MAX475 are single-supply (2.7V to 5.25V), unity-gain-stable op amps with rail-to-rail output swing.

Each op amp guarantees a 10MHz unity-gain bandwidth, 15V/µs slew rate, and 600Ω drive capability while typically consuming only 2mA supply current.

Key Features

  • o 15V/µs Min Slew Rate o +3V Single-Supply Operation o Guaranteed 10MHz Unity-Gain Bandwidth o 2mA Supply Current per Amplifier o Input Range Includes Negative Rail o Outputs Short-Circuit Protected o Rail-to-Rail Output Swing (to within ±50mV) o µMAX Package (the smallest 8-pin SO) MAX473/MAX474/MAX475 ______________Ordering Information PART MAX473CPA MAX473CSA MAX473CUA MAX473C/D MAX473EPA MAX473ESA MAX473MJA TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4732 Dual SPST Analog Switches Maxim Integrated
MAX4733 Dual SPST Analog Switches Maxim Integrated
MAX4735 Quad-SPDT Analog Switch Maxim Integrated
MAX4737 Quad SPST Analog Switches Maxim Integrated
MAX4738 Quad SPST Analog Switches Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX4731 Dual SPST Analog Switches
MAX4734 0.8 / Low-Voltage / 4-Channel Analog Multiplexer
MAX4736 0.8 / Low-Voltage / Single-Supply / Dual SPDT Analog Switch
MAX470 Two-Channel / Triple/Quad RGB Video Switches and Buffers
MAX4700 1.25 / Dual SPST / CMOS Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0260; Rev 1; 3/95 Single/Dual/Quad, 10MHz Single-Supply Op Amps _______________General Description The single MAX473, dual MAX474, and quad MAX475 are single-supply (2.7V to 5.25V), unity-gain-stable op amps with rail-to-rail output swing. Each op amp guarantees a 10MHz unity-gain bandwidth, 15V/µs slew rate, and 600Ω drive capability while typically consuming only 2mA supply current. In addition, the input range includes the negative supply rail and the output swings to within 50mV of each supply rail. Single-supply operation makes these devices ideal for low-power and low-voltage portable applications. With their fast slew rate and settling time, they can replace higher-current op amps in large-signal applications.