MAX495
Description
The dual MAX492, quad MAX494, and single MAX495 operational amplifiers bine excellent DC accuracy with rail-to-rail operation at the input and output. Since the mon-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (+2.7V to +6V) or split supplies (±1.35V to ±3V). Each op amp requires less than 150µA supply current. Even with this low current, the op amps are capable of driving a 1kΩ load, and the input referred voltage noise is only 25n V/√Hz. In addition, these op amps can drive loads in excess of 1n F. The precision performance of the MAX492/MAX494/ MAX495, bined with their wide input and output dynamic range, low-voltage single-supply operation, and very low supply current, makes them an ideal choice for battery-operated equipment and other low-voltage applications. The MAX492/MAX494/MAX495 are available in DIP and SO packages in the industry-standard op-amp pin configurations. The MAX495 is also available in the smallest 8-pin SO:...
