Datasheet4U Logo Datasheet4U.com

MAX504 - 5V / Low-Power / Voltage-Output / Serial 10-Bit DACs

General Description

The MAX504/MAX515 are low-power, voltage-output, 10-bit digital-to-analog converters (DACs) specified for single +5V power-supply operation.

The MAX504 can also be operated with ±5V supplies.

The MAX515 draws only 140µA, and the MAX504 (with internal reference) draws only 260µA.

Key Features

  • o Operate from Single +5V Supply o Buffered Voltage Output o Internal 2.048V Reference (MAX504) o 140µA Supply Current (MAX515) o INL = ±1/2LSB (max) o Guaranteed Monotonic Over Temperature o Flexible Output Ranges: 0V to VDD (MAX504/MAX515) VSS to VDD (MAX504) o 8-Pin SO/DIP (MAX515) o Power-On Reset o Serial Data Output for Daisy-Chaining MAX504/MAX515 ______________Ordering Information PART MAX504CPD MAX504CSD MAX504EPD MAX504ESD MAX515CPA MAX515CSA MAX515EPA MAX515ESA TEMP. RANGE 0°C to +7.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5041 Dual-Phase / Parallelable / Average Current-Mode Controllers Maxim Integrated
MAX5041A Dual-Phase / Parallelable / Average-Current-Mode Controllers Maxim Integrated
MAX5042 Two-Switch Power-IC Maxim Integrated
MAX5043 Two-Switch Power-IC Maxim Integrated
MAX5048C MOSFET Driver Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5048 7.6A / 12ns / SOT23 MOSFET Driver
MAX500 CMOS / Quad / Serial-Interface 8-Bit DAC
MAX5003 High-Voltage PWM Power-Supply Controller
MAX501 Voltage-Output / 12-Bit Multiplying DACs
MAX5012 12-Bit / 100Msps ECL DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0280; Rev 2; 11/96 5V, Low-Power, Voltage-Output, Serial 10-Bit DACs _______________General Description The MAX504/MAX515 are low-power, voltage-output, 10-bit digital-to-analog converters (DACs) specified for single +5V power-supply operation. The MAX504 can also be operated with ±5V supplies. The MAX515 draws only 140µA, and the MAX504 (with internal reference) draws only 260µA. The MAX515 comes in 8-pin DIP and SO packages, while the MAX504 comes in 14pin DIP and SO packages. Both parts have been trimmed for offset voltage, gain, and linearity, so no further adjustment is necessary. The MAX515’s buffer is fixed at a gain of 2. The MAX504’s internal op amp may be configured for a gain of 1 or 2, as well as for unipolar or bipolar output voltages.