Datasheet4U Logo Datasheet4U.com

MAX510 - Quad / Serial 8-Bit DACs

General Description

The MAX509/MAX510 are quad, serial-input, 8-bit voltage-output digital-to-analog converters (DACs).

They operate with a single +5V supply or dual ±5V supplies.

Internal, precision buffers swing rail-to-rail.

Key Features

  • o o o o o Single +5V or Dual ±5V Supply Operation Output Buffer Amplifiers Swing Rail-to-Rail Reference Input Range Includes Both Supply Rails Calibrated Offset, Gain, and Linearity (1LSB TUE) 10MHz Serial Interface, Compatible with SPI, QSPI (CPOL = CPHA = 0) and Microwire o Double-Buffered Registers for Synchronous Updating o Serial Data Output for Daisy-Chaining o Power-On Reset Clears Serial Interface and Sets All Registers to Zero MAX509/MAX510 ______________Ordering Information PART MAX5.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5109 8-Bit DACs Maxim Integrated Products
MAX5113 14-Bit Current DAC Maxim Integrated
MAX5121 Serial Voltage-Output DACs Maxim Integrated
MAX5123 Force/Sense DACs Maxim Integrated
MAX5128 Linear-Taper Digital Potentiometer Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5100 +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
MAX5101 +2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC
MAX5102 +2.7V to +5.5V / Low-Power / Dual / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
MAX5104 Low-Power / Dual / Voltage-Output / 12-Bit DAC with Serial Interface
MAX5105 Nonvolatile / Quad / 8-Bit DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0155; Rev 2; 1/96 Quad, Serial 8-Bit DACs with Rail-to-Rail Outputs _______________General Description The MAX509/MAX510 are quad, serial-input, 8-bit voltage-output digital-to-analog converters (DACs). They operate with a single +5V supply or dual ±5V supplies. Internal, precision buffers swing rail-to-rail. The reference input range includes both supply rails. The MAX509 has four separate reference inputs, allowing each DAC's full-scale range to be set independently. 20-pin DIP, SSOP, and SO packages are available. The MAX510 is identical to the MAX509 except it has two reference inputs, each shared by two DACs. The MAX510 is housed in space-saving 16-pin DIP and SO packages.