Datasheet4U Logo Datasheet4U.com

MAX5152 - Low-Power / Dual / 13-Bit Voltage-Output DACs

General Description

The MAX5152/MAX5153 low-power, serial, voltage-output, dual 13-bit digital-to-analog converters (DACs) consume only 500µA from a single +5V (MAX5152) or +3V (MAX5153) supply.

These devices feature Rail-toRail® output swing and are available in space-saving 16-pin QSOP and DIP packages.

Key Features

  • include a programmable shutdown (2µA), hardware-shutdown lockout, a separate voltage reference for each DAC, power-on reset, and an activelow clear input (CL) that resets all registers and DACs to zero. The MAX5152/MAX5153 provide a programmable logic output pin for added functionality, and a serial-data output pin for daisy chaining. ____________________________Features o 13-Bit Dual DAC with Configurable Output Amplifier o Single-Supply Operation: +5V (MAX5152) +3V (MAX5153) o Rail-to-Rail Ou.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5109 8-Bit DACs Maxim Integrated Products
MAX5113 14-Bit Current DAC Maxim Integrated
MAX5121 Serial Voltage-Output DACs Maxim Integrated
MAX5123 Force/Sense DACs Maxim Integrated
MAX5128 Linear-Taper Digital Potentiometer Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX515 5V / Low-Power / Voltage-Output / Serial 10-Bit DACs
MAX5150 Low-Power / Dual / 13-Bit Voltage-Output DACs
MAX5151 Low-Power / Dual / 13-Bit Voltage-Output DACs
MAX5153 Low-Power / Dual / 13-Bit Voltage-Output DACs
MAX5154 Low-Power / Dual / 12-Bit Voltage-Output DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1304; Rev 0; 10/97 Low-Power, Dual, 13-Bit Voltage-Output DACs with Configurable Outputs _______________General Description The MAX5152/MAX5153 low-power, serial, voltage-output, dual 13-bit digital-to-analog converters (DACs) consume only 500µA from a single +5V (MAX5152) or +3V (MAX5153) supply. These devices feature Rail-toRail® output swing and are available in space-saving 16-pin QSOP and DIP packages. Access to the inverting input allows for specific gain configurations, remote sensing, and high output current capability, making these devices ideally suited for industrial process controls. These devices are also well suited for digitally programmable (4–20mA) current loops. The 3-wire serial interface is SPI™/QSPI™ and Microwire™ compatible.