Datasheet4U Logo Datasheet4U.com

MAX5222 - Dual / 8-Bit / Voltage-Output Serial DAC in 8-Pin SOT23

General Description

The MAX5222 contains two 8-bit, buffered, voltage-output digital-to-analog converters (DAC A and DAC B) in a small 8-pin SOT23 package.

Both DAC outputs can source and sink 1mA to within 100mV of ground and VDD.

The MAX5222 operates with a single +2.7V to +5.5V supply.

Key Features

  • o Operates from a Single +2.7V to +5.5V Supply o Tiny 8-Pin SOT23 Package (3mm ✕ 3mm) o Dual Buffered Voltage Output o Low Power Consumption 0.4mA Operating Current.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5201 16-Bit DACs Maxim Integrated
MAX5202 16-Bit DACs Maxim Integrated
MAX5203 16-Bit DACs Maxim Integrated
MAX5214 Rail-to-Rail DACs Maxim Integrated
MAX5215 Rail-to-Rail DAC Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX522 Dual / 8-Bit / Voltage-Output Serial DAC in 8-Pin SO Package
MAX5223 Voltage Output Serial DAC
MAX520 Quad/Octal / 2-Wire Serial 8-Bit DACs
MAX5200 16-Bit DACs
MAX521 Quad/Octal / 2-Wire Serial 8-Bit DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1720; Rev 0; 4/00 Dual, 8-Bit, Voltage-Output Serial DAC in 8-Pin SOT23 General Description The MAX5222 contains two 8-bit, buffered, voltage-output digital-to-analog converters (DAC A and DAC B) in a small 8-pin SOT23 package. Both DAC outputs can source and sink 1mA to within 100mV of ground and VDD. The MAX5222 operates with a single +2.7V to +5.5V supply. The device uses a 3-wire serial interface, which operates at clock rates up to 25MHz and is compatible with SPI™, QSPI™, and MICROWIRE™ interface standards. The serial input shift register is 16 bits long and consists of 8 bits of DAC input data and 8 bits for DAC selection and shutdown control. DAC registers can be loaded independently or in parallel at the positive edge of CS.