Datasheet4U Logo Datasheet4U.com

MAX5413 - Digital Potentiometers

General Description

The MAX5413/MAX5414/MAX5415 is a family of dual linear taper digital potentiometers.

Each device has two 3-terminal potentiometers.

The MAX5413/MAX5414/ MAX5415 operate from +2.7V to +5.5V single-supply voltages and use an ultra-low 0.1µA supply current.

Key Features

  • o 14-Pin TSSOP Small-Footprint Package MAX5413/MAX5414/MAX5415.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5410 Log Taper Digital Potentiometers Maxim Integrated
MAX5414 Digital Potentiometers Maxim Integrated
MAX5417 256-Tap Nonvolatile I2C-Interface Digital Potentiometers Maxim Integrated Products
MAX5418 256-Tap Nonvolatile I2C-Interface Digital Potentiometers Maxim Integrated Products
MAX5419 256-Tap Nonvolatile I2C-Interface Digital Potentiometers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX541 +5V / Serial-Input / Voltage-Output / 16-Bit DACs
MAX5411 Log Taper Digital Potentiometers
MAX5415 Dual / 256-Tap / Low-Drift / Digital Potentiometers
MAX5400 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23
MAX5401 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1943; Rev 0; 1/01 Dual, 256-Tap, Low-Drift, Digital Potentiometers in 14-Pin TSSOP General Description The MAX5413/MAX5414/MAX5415 is a family of dual linear taper digital potentiometers. Each device has two 3-terminal potentiometers. The MAX5413/MAX5414/ MAX5415 operate from +2.7V to +5.5V single-supply voltages and use an ultra-low 0.1µA supply current. These devices also provide glitchless switching between resistor taps, as well as a convenient poweron reset (POR) that sets the wiper to the midscale position at power-up. Each potentiometer consists of a fixed resistor with a wiper contact that is digitally controlled through a 3-wire serial interface and has 256 tap points. It performs the same function as a discrete potentiometer or variable resistor.