Datasheet4U Logo Datasheet4U.com

MAX549A - +2.5V to +5.5V / Low-Power / Single/Dual / 8-Bit Voltage-Output DACs

General Description

The MAX548A/MAX549A/MAX550A serial, 8-bit voltageoutput digital-to-analog converters (DACs) operate from a single +2.5V to +5.5V supply.

Their ±1LSB TUE specification is guaranteed over temperature.

Operating current (supply current plus reference current) is typically 75µA per DAC with VDD = 2.5V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5492 10kOHM Precision-Matched Resistor-Divider Maxim Integrated Products
MAX5494 10-Bit - Dual - Nonvolatile/ Linear-Taper Digital Potentiometers Maxim Integrated Products
MAX5495 10-Bit - Dual - Nonvolatile/ Linear-Taper Digital Potentiometers Maxim Integrated Products
MAX5496 10-Bit - Dual - Nonvolatile/ Linear-Taper Digital Potentiometers Maxim Integrated Products
MAX5497 10-Bit - Dual - Nonvolatile/ Linear-Taper Digital Potentiometers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5490 100k Precision-Matched Resistor-Divider
MAX5491 Precision-Matched Resistor-Divider in SOT23
MAX5400 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23
MAX5401 256-Tap SOT-PoT / Low-Drift Digital Potentiometers in SOT23
MAX5402 256-Tap / PoT / Low-Drift / Digital Potentiometer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX548A/MAX549A/MAX550A 19-1206; Rev 0; 3/97 +2.5V to +5.5V, Low-Power, Single/Dual, 8-Bit Voltage-Output DACs in µMAX Package _______________General Description The MAX548A/MAX549A/MAX550A serial, 8-bit voltageoutput digital-to-analog converters (DACs) operate from a single +2.5V to +5.5V supply. Their ±1LSB TUE specification is guaranteed over temperature. Operating current (supply current plus reference current) is typically 75µA per DAC with VDD = 2.5V. In shutdown, the DAC is disconnected from the reference, reducing current drain to less than 1µA. The MAX548A/MAX549A allow each DAC to be shut down independently. The 10MHz, 3-wire serial interface is compatible with SPI™/QSPI™ and Microwire™ interface standards.