Datasheet4U Logo Datasheet4U.com

MAX6459 - High-Voltage / Low-Current Voltage Monitors

Description

The MAX6457

MAX6460 high supply voltage, low-power voltage monitors operate over a 4V to 28V supply voltage range.

Features

  • Wide Supply Voltage Range, 4V to 28V.
  • Internal 2.25V ±2.5% Reference.
  • Low Current (3.5μA, typ at 12V).
  • Open-Drain n-Channel Output (28V Compliant).
  • Internal Threshold Hysteresis Options (0.5%, 5%, 8.3%).
  • Two IN-to-OUT Timeout Period Options (50μs, 150ms).
  • Internal Undervoltage Lockout.
  • Immune to Short Voltage Transients.
  • Small SOT23 Packages.
  • Few External Components.
  • Fully Sp.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX6450 uP Reset Circuits Maxim Integrated Products
MAX6451 uP Reset Circuits Maxim Integrated Products
MAX6452 uP Reset Circuits Maxim Integrated Products
MAX6406 Voltage Detectors Maxim Integrated Products
MAX6407 Voltage Detectors Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX6453 uP Supervisors with Separate VCC Reset and Manual Reset Outputs
MAX6454 uP Supervisors with Separate VCC Reset and Manual Reset Outputs
MAX6455 uP Supervisors with Separate VCC Reset and Manual Reset Outputs
MAX6456 uP Supervisors with Separate VCC Reset and Manual Reset Outputs
MAX6457 High-Voltage / Low-Current Voltage Monitors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX6457–MAX6460 High-Voltage, Low-Current Voltage Monitors in SOT Packages General Description The MAX6457–MAX6460 high supply voltage, low-power voltage monitors operate over a 4V to 28V supply voltage range. Each device includes a precision bandgap reference, one or two low-offset voltage comparators, internal threshold hysteresis, power-good or reset timeout options, and one or two high-voltage open-drain outputs. Two external resistors (three for window detection) set the trip threshold voltages. The MAX6457 is a single voltage monitor for undervoltage or overvoltage detection. A logic-based clear input either latches the output for overvoltage applications or allows the device to operate in transparent mode.
Published: |