Datasheet4U Logo Datasheet4U.com

MAX680 - +5V to 10V Voltage Converters

General Description

The MAX680/MAX681 are monolithic, CMOS, dual chargepump voltage converters that provide ±10V outputs from a +5V input voltage.

The MAX680/MAX681 provide both a positive step-up charge pump to develop +10V from +5V input and an inverting charge pump to generate the -10V output.

Key Features

  • 95% Voltage-Conversion Efficiency.
  • 85% Power-Conversion Efficiency.
  • +2V to +6V Voltage Range.
  • Only Four External Capacitors Required (MAX680).
  • No Capacitors Required (MAX681).
  • 500µA Supply Current.
  • Monolithic CMOS Design Ordering Information PART MAX680CPA MAX680CSA MAX680C/D TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C MAX680EPA -40°C to +85°C MAX680ESA MAX680MJA MAX681CPD MAX681EPD -40°C to +85°C -55°C to +125°.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX6833 Ultra-Low-Voltage SC70 Voltage Detectors and uP Reset Circuits Maxim Integrated
MAX6834 Ultra-Low-Voltage SC70 Voltage Detectors and uP Reset Circuits Maxim Integrated
MAX6835 Ultra-Low-Voltage SC70 Voltage Detectors and uP Reset Circuits Maxim Integrated
MAX6836 Ultra-Low-Voltage SC70 Voltage Detectors and uP Reset Circuits Maxim Integrated
MAX6837 Ultra-Low-Voltage SC70 Voltage Detectors and uP Reset Circuits Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX6800 3-Pin / Low-Power uP Reset Circuits
MAX6801 Low-Power uP Reset Circuits
MAX6802 Low-Power uP Reset Circuits
MAX6803 4-Pin / Low-Power P Reset Circuits with Manual Reset
MAX6804 4-Pin / Low-Power P Reset Circuits with Manual Reset

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX680/MAX681 +5V to ±10V Voltage Converters General Description The MAX680/MAX681 are monolithic, CMOS, dual chargepump voltage converters that provide ±10V outputs from a +5V input voltage. The MAX680/MAX681 provide both a positive step-up charge pump to develop +10V from +5V input and an inverting charge pump to generate the -10V output. Both parts have an on-chip, 8kHz oscillator. The MAX681 has the capacitors internal to the package, and the MAX680 requires four external capacitors to produce both positive and negative voltages from a single supply. The output source impedances are typically 150Ω, providing useful output currents up to 10mA.