MAX710 Datasheet | Maxim Integrated

Description The MAX710/MAX711 integrate a step-up DC-DC converter with a linear regulator to provide step-up/down voltage conversion. They are optimized for battery applications where the input varies above and below the regulated output voltage. They have an input range from +1.8V to +11V. Typical efficiency when boosting battery inputs is 85%. The MAX710/MAX711 can be configured for minimum noise or optimum efficiency. Shutdown control turns off the part pletely, disconnecting the input from the output (ISHDN = 0.2µA). Standby control turns off only the step-up converter and leaves the low-power linear regulator active (IQ = 7µA). The MAX710 has a preset 3.3V or 5V output voltage. The MAX711 has an adjustable output that can be set from +2.7V to +5.5V with two resistors. Both devices e in 16-pin narrow SO packages. ________________________Applications Single-Cell, Lithium-Powered Portable Devices Digital Cameras 2- to 4-Cell AA Alkaline Hand-Held Equipment 3.3V and Other Low-Voltage Systems 2-, 3-, and 4-Cell Battery-Powered Equipment Battery-Powered Devices with AC Input Adapters ____________________________Features o Step-Up/Down Voltage Conversion o +1.8V to +11V Input Range o Output: 5V/250m A at VIN = 1.8V 5V/500m A at VIN = 3.6V o No External FETs Required o Load Disconnected from Input in Shutdown o Battery Drain: 200µA No-Load (VIN = 4V) 7µA in Standby 0.2µA when Off o Low-Noise and High-Efficiency Modes ______________Ordering Information PART MAX710C/D MAX710ESE MAX711C/D MAX711ESE TEMP. RANGE 0°C to +70°C -40°C to +85°C 0°C to +70°C -40°C to +85°C PIN-PACKAGE Dice 16 Narrow SO Dice 16 Narrow SO __________Typi Fcuanl c Otpioenraalti Dngia Cgriracmusit __________________Pin Configuration +1.8V TO +11V INPUT C1 STBY 3.3V OFF ON 5V N/E LBI+ LBO SHDN MAX710 STBY 3/5 PS OUT LBI- L1 C2 OUTPUT 3.3V/5V C4 C3 0.1µF PGND GND ILIM Pin Configurations appear at end of data sheet. Functional Diagrams continued at end of data sheet. UCSP is a...