Datasheet4U Logo Datasheet4U.com

MAX727 - 5V/3.3V/3V 5A Step-Down / PWM / Switch-Mode DC-DC Regulators

Description

The MAX727/MAX728/MAX729 are monolithic, bipolar, pulse-width modulation (PWM), switch-mode, step-down DC-DC regulators.

Each is rated at 2A.

Very few external components are needed for standard operation because the power switch, oscillator, feedback, and control circuitry are all on-chip.

Features

  • o Input Range: Up to 40V o 2A On-Chip Power Switch o Fixed Outputs: 5V (MAX727) 3.3V (MAX728) 3V (MAX729) o 100kHz Switching Frequency o Excellent Dynamic Characteristics o Few External Components o 8.5mA Quiescent Current o TO-220 Package MAX727/MAX728/MAX729 ______________Ordering Information PART MAX727CCK MAX727ECK MAX728CCK MAX728ECK MAX729CCK MAX729ECK TEMP. RANGE 0°C to +70°C -40°C to +85°C 0°C to +70°C -40°C to +85°C 0°C to +70°C -40°C to +85°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX720 PALMTOP COMPUTER AND FLASH MEMORY POWER SUPPLY REGULATORS Maxim Integrated Products
MAX721 PALMTOP COMPUTER AND FLASH MEMORY POWER SUPPLY REGULATORS Maxim Integrated Products
MAX7219 8-Digit LED Display Drivers Maxim Integrated
MAX7000A Programmable Logic Device Altera Corporation
MAX7030 ASK Transceiver Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX722 PALMTOP COMPUTER AND LCD POWER SUPPLY REGULATORS
MAX7221 Serially Interfaced / 8-Digit LED Display Drivers
MAX723 PALMTOP COMPUTER AND LCD POWER SUPPLY REGULATORS
MAX7231 Triplexed LCD Decoder/Drivers
MAX7232 Triplexed LCD Decoder/Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0149; Rev 2; 9/95 5V/3.3V/3V 2A Step-Down, PWM, Switch-Mode DC-DC Regulators _______________General Description The MAX727/MAX728/MAX729 are monolithic, bipolar, pulse-width modulation (PWM), switch-mode, step-down DC-DC regulators. Each is rated at 2A. Very few external components are needed for standard operation because the power switch, oscillator, feedback, and control circuitry are all on-chip. Employing a classic buck topology, these regulators perform high-current step-down functions. These regulators have excellent dynamic and transient response characteristics, while featuring cycle-by-cycle current limiting to protect against overcurrent faults and shortcircuit output faults. They also have a wide 8V to 40V input range. Each regulator is available in a 5-pin TO-220 package.
Published: |