Datasheet4U Logo Datasheet4U.com

MAX7370 - 8 x 8 Key-Switch Controller and LED Driver/GPIOs

Description

The MAX7370 I2C-interfaced peripheral provides microprocessors with management of up to 64 key switches, with optional GPIO and PWM-controlled LED drivers.

The key-switch drivers interface with metallic or resistive switches with on-resistances up to 5kI.

Features

  • autosleep and autowake modes to further minimize the power consumption of the device. The autosleep feature puts the device in a low-power state (1µA typ) after a timeout period. The autowake feature configures the device to return to normal operating mode from sleep upon a keypress. The key controller debounces and maintains a FIFO buffer of keypress and release events (including autorepeat, if enabled). An interrupt (INT) output can be configured to alert keypresses, as they occur, or at the m.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX730A Current-Mode PWM DC-DC Converters Maxim Integrated
MAX7310 2-Wire-Interfaced 8-Bit I/O Port Expander Maxim Integrated Products
MAX7311 2-Wire-Interfaced 16-Bit I/O Port Expander Maxim Integrated Products
MAX7313 16-Port I/O Expander Maxim Integrated Products
MAX7314 18-Port GPIO Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX737 -5V /-12V /-15V / and Adjustable Inverting Current-Mode PWM Regulators
MAX7375 3-Pin Silicon Oscillator
MAX7376 Silicon Oscillator with Reset Output
MAX7377 Silicon Oscillator
MAX7378 Silicon Oscillator with Low-Power Frequency Switching and Reset Output

Full PDF Text Transcription

Click to expand full text
EVALUATION KIT AVAILABLE MAX7370 8 x 8 Key-Switch Controller and LED Driver/GPIOs with I2C Interface and High Level of ESD Protection General Description The MAX7370 I2C-interfaced peripheral provides microprocessors with management of up to 64 key switches, with optional GPIO and PWM-controlled LED drivers. The key-switch drivers interface with metallic or resistive switches with on-resistances up to 5kI. Key inputs are monitored statically, not dynamically, to ensure low-EMI operation. The IC features autosleep and autowake modes to further minimize the power consumption of the device. The autosleep feature puts the device in a low-power state (1µA typ) after a timeout period. The autowake feature configures the device to return to normal operating mode from sleep upon a keypress.
Published: |