MAX782 Datasheet | Maxim Integrated

Description The MAX782 is a system-engineered power-supply controller for notebook puters or similar battery-powered equipment. It provides two high-performance step-down (buck) pulse-width modulators (PWMs) for +3.3V and +5V, and dual PCMCIA VPP outputs powered by an integral flyback winding controller. Other functions include dual, lowdropout, micropower linear regulators for CMOS/RTC backup, and three precision low-battery-detection parators. High efficiency (95% at 2A; greater than 80% at loads from 5m A to 3A) is achieved through synchronous rectification and PWM operation at heavy loads, and Idle Mode TM operation at light loads. It uses physically small ponents, thanks to high operating frequencies (300k Hz/200k Hz) and a new current-mode PWM architecture that allows for output filter capacitors as small as 30µF per ampere of load. Line- and load-transient response are terrific, with a high 60k Hz unity-gain crossover frequency allowing output transients to be corrected within four or five clock cycles. Low system cost is achieved through a high level of integration and the use of low-cost, external N-channel MOSFETs. The integral flyback winding controller provides a low-cost, +15V high-side output that regulates even in the absence of a load on the main output. Other features include low-noise, fixed-frequency PWM operation at moderate to heavy loads and a synchronizable oscillator for noise-sensitive applications such as electromagnetic pen-based systems and municating puters. The MAX782 is a monolithic Bi CMOS IC available in fine-pitch, SSOP surface-mount packages. _______________________Applications Notebook puters Portable Data Terminals municating puters Pen-Entry Systems ______Typical Application Diagram ___________________________Features o Dual PWM Buck Controllers (+3.3V and +5V) o Dual PCMCIA VPP Outputs (0V/5V/12V) o Three Precision parators or Level Translators o 95% Efficiency o 420µA Quiescent Current; 70µA in Standby (linear regulators alive) o...