Datasheet4U Logo Datasheet4U.com

MAX818M - +5V Microprocessor Supervisory Circuits

General Description

The MAX817/MAX818/MAX819 microprocessor (µP) supervisory circuits simplify power-supply monitoring, battery control, and chip-enable gating in µP systems by reducing the number of components required.

These devices are designed for use in +5V-powered systems.

Key Features

  • o Precision Supply-Voltage Monitor: 4.65V (MAX81_L) 4.40V (MAX81_M) o 11µA Quiescent Supply Current o 200ms Reset Time Delay o Watchdog Timer with 1.6sec Timeout (MAX817/MAX818) o Battery-Backup Power Switching; Battery Voltage Can Exceed VCC o Battery Freshness Seal o On-Board, 3ns Gating of Chip-Enable Signals (MAX818) o Uncommitted Voltage Monitor for Power-Fail or Low-Battery Warning (MAX817/MAX819) o Manual Reset Input (MAX819) MAX817L/M, MAX818L/M, MAX819L/M.
  • _____________________Sel.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX810 3-Pin Microprocessor Reset Circuits Maxim Integrated
MAX810 Very Low Supply Current 3-Pin Microprocessor Reset Monitors ON Semiconductor
MAX810 3-pin microprocessor resets NXP
MAX812 4-Pin uP Voltage Monitors Maxim Integrated
MAX813L uP Supervisory Circuit ART CHIP

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX818L +5V Microprocessor Supervisory Circuits
MAX811 4-Pin uP Voltage Monitors
MAX813L Low-Cost / uP Supervisory Circuits
MAX814 1% Accuracy / Low-Power / +3V and +5V uP Supervisory Circuits
MAX815 1% Accuracy / Low-Power / +3V and +5V uP Supervisory Circuits

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0494; Rev 1; 3/96 +5V Microprocessor Supervisory Circuits _______________General Description The MAX817/MAX818/MAX819 microprocessor (µP) supervisory circuits simplify power-supply monitoring, battery control, and chip-enable gating in µP systems by reducing the number of components required. These devices are designed for use in +5V-powered systems. Low supply current (11µA typical) and small package size make these devices ideal for portable applications. The MAX817/MAX818/MAX819 are specifically designed to ignore fast transients on VCC. Other supervisory functions include active-low reset, backupbattery switchover, watchdog input, battery freshness seal, and chip-enable gating. The Selector Guide below lists the specific functions available from each device.