Datasheet4U Logo Datasheet4U.com

MAX8530 - Dual Low-Dropout Linear Regulators

General Description

The MAX8530/MAX8531 offer the benefits of lowdropout voltage and ultra-low power regulation in subminiaturized UCSP and QFN packages with an integrated microprocessor reset circuit (MAX8530 only).

Key Features

  • include short-circuit protection and thermal-shutdown protection. The MAX8530 provides microprocessor open-drain, active-low reset output to monitor OUT1, eliminating external components and adjustments. The MAX8530 asserts a 100ms (min) RESET signal when OUT1 drops below 87% of the nominal output voltage. The MAX8531 includes a reference bypass pin for low output noise (40µVRMS). Both devices include a logic-controlled shutdown input and are available in 6-bump UCSP and 6-pin thin QFN exposed p.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX8536 ORing MOSFET Controllers Maxim Integrated
MAX8538 Dual-Synchronous Buck Controllers Maxim Integrated
MAX8539 Dual-Synchronous Buck Controllers Maxim Integrated
MAX8505 Step-Down Regulator Maxim Integrated
MAX8506 PWM Step-Down DC-DC Converters Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX853 Low-Noise / Regulated / Negative Charge-Pump Power Supplies for GaAsFET Bias
MAX8531 Dual Low-Dropout Linear Regulators
MAX8532 Low-Noise / Low-Dropout / 200mA Linear Regulator in UCSP
MAX8535 ORing MOSFET Controllers
MAX8537 Dual-Synchronous Buck Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2711; Rev 0; 1/03 Dual Low-Dropout Linear Regulators with RESET or Low-Noise Output in UCSP or QFN General Description The MAX8530/MAX8531 offer the benefits of lowdropout voltage and ultra-low power regulation in subminiaturized UCSP and QFN packages with an integrated microprocessor reset circuit (MAX8530 only). The devices operate from a 2.5V to 6.5V input and deliver up to 200mA and 150mA outputs with low dropout of 100mV (typ) at 100mA. Designed with an internal P-channel MOSFET pass transistor, the supply current is kept at a low 130µA (with both LDOs on), independent of the load current and dropout voltage. Other features include short-circuit protection and thermal-shutdown protection.