Datasheet4U Logo Datasheet4U.com

MAX869L - P-Channel Switch

General Description

The MAX869L P-channel load switch

Key Features

  • an accurate user-set current limit and low on-resistance. This switch is designed to protect your power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage range is 2.7V to 5.5V. The MAX869L features a 2A, 45mΩ switch controlled by a logic signal. Current-limit accuracy is ±21%, and can be set from 400mA to 2.4A using a single resistor. The device has a low 12µA quiescent supply current, which reduces to 2µA max in shutdown.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX86916 Integrated Optical Sensor Maxim Integrated
MAX8600 Single-/Dual-Input 1-Cell Li Chargers Maxim Integrated Products
MAX8600A Single-Input 1-Cell Li+ Charger Maxim Integrated Products
MAX8601 Single-/Dual-Input 1-Cell Li Chargers Maxim Integrated Products
MAX8606 Li+ Linear Battery Charger Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX8698C PMIC
MAX860 Switched-Capacitor Voltage Converters
MAX863 Dual / High-Efficiency / PFM / Step-Up DC-DC Controller
MAX864 Dual-Output Charge Pump with Shutdown
MAX865 Compact / Dual-Output Charge Pump

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1278; Rev 0; 8/97 2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown _______________General Description The MAX869L P-channel load switch features an accurate user-set current limit and low on-resistance. This switch is designed to protect your power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage range is 2.7V to 5.5V. The MAX869L features a 2A, 45mΩ switch controlled by a logic signal. Current-limit accuracy is ±21%, and can be set from 400mA to 2.4A using a single resistor. The device has a low 12µA quiescent supply current, which reduces to 2µA max in shutdown.