Datasheet4U Logo Datasheet4U.com

MAX8922L - 30V Li+ Linear Battery Charger

Description

The MAX8922L linear battery charger safely charges a single-cell lithium-ion (Li+) battery.

Charging rate is optimized to accommodate the thermal characteristics of a given application.

There is no need to reduce the maximum charge current at the worst-case charger power dissipation.

Features

  • o Overvoltage-Protected 30VDC Rated Input (IN) o Input Overvoltage-Protected Safe 4.94V LDO Output o 2.3A GSM RF Test Mode o No External FET, Blocking Diode, or Sense Resistor Required o 1-Wire Easy Programmable Fast-Charge and GSM Test Mode (EN/SET) o Resistor-Programmable Fast-Charge Current (SETI) o Resistor-Programmable Top-Off Current Threshold (MIN) o Prequalification Charge o Power-OK Monitor Output (POK) o Charging-Status Output (CHG) o Die Temperature Regulation for Optimized Charge Rat.

📥 Download Datasheet

Datasheet preview – MAX8922L

Datasheet Details

Part number MAX8922L
Manufacturer Maxim
File Size 427.58 KB
Description 30V Li+ Linear Battery Charger
Datasheet download datasheet MAX8922L Datasheet
Additional preview pages of the MAX8922L datasheet.

📁 Similar Datasheet

  • MAX8900A - 1.2A Switch-Mode Li+ Chargers (Maxim Integrated Products)
  • MAX8900B - 1.2A Switch-Mode Li+ Chargers (Maxim Integrated Products)
  • MAX8900C - 1.2A Switch-Mode Li+ Chargers (Maxim Integrated Products)
  • MAX8901A - Highest Efficiency Supply (Maxim Integrated Products)
  • MAX8901B - Highest Efficiency Supply (Maxim Integrated Products)
  • MAX8902A - Low-Noise 500mA LDO Regulators (Maxim Integrated Products)
  • MAX8902B - Low-Noise 500mA LDO Regulators (Maxim Integrated Products)
  • MAX8903A - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated Products)
  • MAX8903B - 1-Cell Li+ DC-DC Charger (Maxim Integrated Products)
  • MAX8903C - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
Other Datasheets by Maxim
  • MAX892L - 2A / Current-Limited / High-Side P-Channel Switch
  • MAX890L - Current-Limited, High-Side P-Channel Switch
  • MAX891L - 2A / Current-Limited / High-Side P-Channel Switch
  • MAX893L - 1.2A / Current-Limited / High-Side P-Channel Switch
  • MAX894L - High-Side P-Channel Switches
  • MAX895L - High-Side P-Channel Switch
  • MAX809J - 3-Pin Microprocessor Reset Circuits
  • MAX809L - 3-Pin Microprocessor Reset Circuits

Full PDF Text Transcription

Click to expand full text
19-4929; Rev 0; 9/09 30V Li+ Linear Battery Charger with GSM Test Mode in 3mm x 2mm TDFN General Description The MAX8922L linear battery charger safely charges a single-cell lithium-ion (Li+) battery. Charging rate is optimized to accommodate the thermal characteristics of a given application. There is no need to reduce the maximum charge current at the worst-case charger power dissipation. Charging is optimized for a single Li+ cell using a control algorithm that includes low-battery precharging, voltage and current-limited fast charging, and top-off charging, while continuously monitoring for input overvoltage and device die-temperature conditions. The fast-charge current and top-off current thresholds are programmable by a simple 1-Wire® serial interface.
Published: |