Datasheet4U Logo Datasheet4U.com

MAX894L - High-Side P-Channel Switches

General Description

The MAX894L/MAX895L smart, dual, low-voltage, P-channel, MOSFET power switches are intended for high-side load-switching applications.

These switches operate with inputs from +2.7V to +5.5V, making them ideal for both 3V and 5V systems.

Key Features

  • o +2.7V to +5.5V Input Range o Programmable Current Limits o Low Supply Current: 16µ A IQ at VIN = 3.3V 0.1µ A with Switch Off o Thermal Shutdown MAX894L/MAX895L ______________Ordering Information PART.
  • MAX894LC/D TEMP. RANGE 0°C to +70°C -40°C to +85°C 0°C to +70°C -40°C to +85°C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX8940 120mA Linear Regulator Maxim Integrated Products
MAX8900A 1.2A Switch-Mode Li+ Chargers Maxim Integrated Products
MAX8900B 1.2A Switch-Mode Li+ Chargers Maxim Integrated Products
MAX8900C 1.2A Switch-Mode Li+ Chargers Maxim Integrated Products
MAX8901A Highest Efficiency Supply Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX890L Current-Limited, High-Side P-Channel Switch
MAX891L 2A / Current-Limited / High-Side P-Channel Switch
MAX8922L 30V Li+ Linear Battery Charger
MAX892L 2A / Current-Limited / High-Side P-Channel Switch
MAX893L 1.2A / Current-Limited / High-Side P-Channel Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1153; Rev 0; 10/96 Dual, Current-Limited, High-Side P-Channel Switches with Thermal Shutdown _______________General Description The MAX894L/MAX895L smart, dual, low-voltage, P-channel, MOSFET power switches are intended for high-side load-switching applications. These switches operate with inputs from +2.7V to +5.5V, making them ideal for both 3V and 5V systems. Internal currentlimiting circuitry protects the input supply against overload. Thermal-overload protection limits power dissipation and junction temperature. The MAX894L/MAX895L’s maximum current limits are 500mA and 250mA, respectively. The current limit through the switches is programmed with resistors from SET A/SET B to ground. When the switches are on, the quiescent supply current is a low 16 µ A.