MAX9077
Description
The MAX9075/MAX9077 single/dual parators are optimized for 3V and 5V single-supply applications. These parators have a 580ns propagation delay and consume just 3µA per parator. The bination of low-power, single-supply operation down to 2.1V, and ultra-small footprint makes these devices ideal for all portable applications.
The MAX9075/MAX9077 have a mon-mode input voltage range of -0.2V to VCC
- 1.2V. Unlike many parators, there is no differential clamp between the inputs, allowing the differential input voltage range to extend rail-to-rail. All inputs and outputs tolerate a continuous short-circuit fault condition to either rail.
The design of the output stage limits supply-current surges while switching (typical of many other parators), minimizing power consumption under dynamic conditions. Large internal push-pull output drivers allow rail-to-rail output swing with loads up to 2m A, making these devices ideal for interface with TTL/CMOS logic.
The MAX9075 single parator...
