Datasheet4U Logo Datasheet4U.com

MAX908 - Single/Dual/Quad High-Speed / Ultra Low-Power / Single-Supply TTL Comparators

General Description

The MAX907/MAX908/MAX909 dual, quad, and single high-speed, ultra low-power voltage comparators are designed for use in systems powered from a single +5V supply; the MAX909 also accepts dual ±5V supplies.

Key Features

  • complementary outputs and an output latch. A separate supply pin for extending the analog input range down to -5V is also provided. The dual MAX907 and single MAX909 are available in 8-pin DIP and small-outline packages, and the quad MAX908 is available in 14-pin DIP and small-outline packages. These comparators are ideal for single +5V-supply.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX900 Low-Power Voltage Comparators Maxim Integrated
MAX9000 Single-Supply Op Amp + Comparator Maxim Integrated
MAX9001 Single-Supply Op Amp + Comparator Maxim Integrated
MAX9002 Single-Supply Op Amp + Comparator Maxim Integrated
MAX9003 Single-Supply Op Amp + Comparator Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX905 High-Speed / Positive Edge-Triggered / ECS-Compatible Voltage Comparators
MAX906 ECS-Compatible Voltage Comparators
MAX907 Single/Dual/Quad High-Speed / Ultra Low-Power / Single-Supply TTL Comparators
MAX9075 Low-Cost / Ultra-Small / 3A Single-Supply Comparators
MAX9077 Low-Cost / Ultra-Small / 3A Single-Supply Comparators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0129; Rev. 3; 7/94 Single/Dual/Quad High-Speed, Ultra Low-Power, Single-Supply TTL Comparators _______________General Description The MAX907/MAX908/MAX909 dual, quad, and single high-speed, ultra low-power voltage comparators are designed for use in systems powered from a single +5V supply; the MAX909 also accepts dual ±5V supplies. Their 40ns propagation delay (with 5mV input overdrive) is achieved with a power consumption of only 3.5mW per comparator. The wide input commonmode range extends from 200mV below ground (below the negative supply rail for the MAX909) to within 1.5V of the positive supply rail.