MXD86C2 Datasheet | Maxscend

DP12T Switch with MIPI for LTE TRX Application APPROVED This document contains information that is confidential and proprietary to Maxscend Microelectronics pany Limited (Maxscend) and may not be reproduced in any form without express written consent of Maxscend. No transfer or licensing of technology is implied by this document. Maxscend Microelectronics pany Limited. All rights reserved. Maxscend Confidential Page 1 of 11 - DP12T Switch with MIPI for LTE TRX Application General Description The MXD86C2 is a low loss, high isolation DP12T switch for antenna TRX application. The MXD86C2 is patible with MIPI control, which is a key requirement for many cellular transceivers. This part is packaged in a pact 2.0mm x 2.4mm, 18-pin, LGA package which allows for a small solution size with no need for external DC blocking capacitors (when no external DC is applied to the device ports). Features - Excellent insertion loss - 0.50 d B Insertion Loss at 2.7GHz - P0.1d B @ 35d Bm - Multi-Band operation 400MHz to 3800MHz - RFFE serial control interface - pact 2.0mm x 2.4mm in LGA-18 package - No DC blocking capacitors required (unless external DC is applied to the RF ports) Applications - 3G/4G multimode cellular handsets (UMTS and CDMA2000) - Carrier aggregation diversity Functional Block Diagram and Pin Function RFA1 RFA2 RFA3 RFA4 RFA5 RFA6 RFB1 RFB2 RFB3 RFB4 RFB5 RFB6 ANT_A ANT_B Grou nd Paddle VIO SCLK VDD SDATA Figure 1 Functional Block Diagram and Pinout (Top View) Maxscend Microelectronics pany Limited. All rights reserved. Maxscend Confidential Page 2 of 11 Application Circuit - DP12T Switch with MIPI for LTE TRX...