MLX10801 Datasheet | Melexis

Features VS CONTR General - Minimum number of inexpensive external ponents - Auto shutdown in case of over temperature with internal or external temperature sensor - Small package allows pact module design with minimised wire runs and short connections to achieve improved EMI performance - MLX10801 is offered in 2 package options: SOIC8 and MLPD8 5x5. The MLPD8 5x5 package option allows to take out a higher peak and average current than the SOIC8 package option LED driver High energy efficiency Light control via PWM possible Light output has a minimized dependency on supply and temperature variations - Adjustable LED parameters are stored in an internal NV memory - - - GND TEST CALIB 10801 (SO8) DRVOUT RSENSE DSENSE VS GND TEST CALIB CONTR DRVOUT RSENSE DSENSE MLX10801 (M LPD8 5x5) Coil driver - Additional use for driving coils like relays and micro valves in a power saving mode - Works with a wide range of coils - - Electronic fuse Additional use as electronic fuse. Fuse current adjust possibility Ordering Information Part Nr MLX10801 MLX10801 Temperature Code R (-40°C to 105°C) R (-40°C to 105°C) Package Code DC (SOIC8) LDC (MLPD8 5x5) General Description The MLX10801 is a multi-purpose LED driver for high power LEDs designed for automotive applications. A lot of adjustment possibilities allow for the design of different LED applications using only a few external ponents. The circuit is load dump protected for a 40V load dump pulse. As a second use, a variety of coils like relays and micro valves can be driven in a very efficient power saving mode. A third use is a simple electronic fuse, to protect circuits from overcurrent or overtemperature. 3901010801 Author: TFR Page 1/41 revised: RAH/SSZ Rev 021 14/July/05 Free Datasheet http://../ IC specification Power LED driver for automotive applications Power saving low side coil driver Electronic fuse Table of content Features...