MDT10P23 Datasheet | Micon Design

Description This ROM-Based 8 -bit micro-controller uses a fully static CMOS design technology to achieve high speed, small size, low power and high noise immunity. On chip memory includes 2K words ROM and80 bytes static RAM. Four parator inputs with external Vref (not for 18 pin package) are also provided. u u u XTAL¡ÐStandard crystal oscillator HFXT¡ÐHigh frequency crystal oscillator 4 oscillator start-up time can be selected by programming option: 150 µs, 20 ms, 40 ms, 80 ms On-chip RC oscillator based Watchdog Timer(WDT) can be operated freely 12 I/O(for 18 pins package),14 I/O(for 20 pins package),16 I/O(for 22/24 pins package) pins with their own independent direction control 2. Features u u u u Fully CMOS static design 8-bit data bus On chip ROM size : 2 K words Internal RAM size : 80 bytes (72 general purpose registers, 8 special registers) u u u u u u 36 single word instructions 14-bit instructions 2-level stacks Operating voltage : 2.3V ~ 5.5 V Operating frequency : 0 ~ 20 MHz The most fast execution time is 200 ns under 20 MHz in all single cycle instructions except the branch instruction u Addressing modes include direct, indirect and relative addressing modes u u u u u Built-in Power-on Reset 4 Channel parator Power edge-detector Reset Sleep Mode for power saving 8-bit real time clock/counter(RTCC) with 8-bit programmable prescaler u 4 types of oscillator can be selected by programming option: RC¡ÐLow cost RC oscillator LFXT¡ÐLow frequency crystal oscillator 3. Applications The application areas of this MDT10C23 range from appliance motor control and high speed automotive to low power remote transmitters/receivers, pointing devices, and telemunications processors, such as Remote controller, small instruments, chargers, toy, automobile and PC peripheral … etc This specification are subject to be changed without notice. Any latest information please preview http;//.mdtic..tw P. 1 2004/7 Ver. 1.1 MDT10C23 4. Pin Assignment ¡° A1¡G20PINS, A2¡G22PINS,...