Datasheet4U Logo Datasheet4U.com

MDT80P10 - USB/UART

Features

  • MDT80P10 USB/UART For UPS This document specifies the RS232C communication protocol of the Advance-Intelligent UPS. USB : Special designed MCU for USB Meet low-speed (1.5Mbps) USB spec Version 1.1 Support 1 device address and 3 endpoints 8-bit data bus UART : BAUD RATE : 2400bps DATA LENGTH : 8 Bits STOP BIT : 1bit PARITY : NONE Operating voltage: 4.5V ~ 5.5 V Oscillator frequency: 6 MHz/12MHz Power-on Reset Power edge-detector Reset 4 interrupt sources: -TMR0 timer -USB Endpoint 0 -USB End.

📥 Download Datasheet

Datasheet preview – MDT80P10

Datasheet Details

Part number MDT80P10
Manufacturer Micon Design
File Size 38.28 KB
Description USB/UART
Datasheet download datasheet MDT80P10 Datasheet
Additional preview pages of the MDT80P10 datasheet.

📁 Similar Datasheet

  • MDT-160 - PHASE CONTROL THYRISTOR (ELECTROVIPRYAMITEL)
  • MDT08N017RH - N-channel MOSFET (MagnaChip)
  • MDT1005 - 8-bit micro-controller (Micon Design Technology)
  • MDT1010 - 8-bit micro-controller (Micon Design Technology)
  • MDT1020 - 8-bit micro-controller (Micon Design Technology)
  • MDT1030 - 8-bit micro-controller (Micon Design Technology)
  • MDT1051 - 8-bit micro-controller (Micon Design Technology)
  • MDT10C22 - 8-bit micro-controller (Micon Design Technology)
  • MDT10C23 - 8-bit micro-controller (Micon Design Technology)
  • MDT10C41A1 - 8-bit Micro-controller (Micon Design Technology Corporation)
Other Datasheets by Micon Design

Full PDF Text Transcription

Click to expand full text
1. Features MDT80P10 USB/UART For UPS This document specifies the RS232C communication protocol of the Advance-Intelligent UPS. USB : Special designed MCU for USB Meet low-speed (1.5Mbps) USB spec Version 1.1 Support 1 device address and 3 endpoints 8-bit data bus UART : BAUD RATE : 2400bps DATA LENGTH : 8 Bits STOP BIT : 1bit PARITY : NONE Operating voltage: 4.5V ~ 5.5 V Oscillator frequency: 6 MHz/12MHz Power-on Reset Power edge-detector Reset 4 interrupt sources: -TMR0 timer -USB Endpoint 0 -USB Endpoint 1 -USB Endpoint 2 2 types of oscillator can be selected by programming option: XTAL－Standard crystal oscillator HFXT－High frequency crystal oscillator This specification are subject to be changed without notice. Any latest information please preview http;//www.mdtic.com.tw P.
Published: |