KSZ8031RNL Description
Features The KSZ8031RNL is a single-supply 10Base-T/100BaseTX Ethernet physical layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8031RNL is a highly-integrated, pact solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs, by integrating a low noise regulator to supply the...
KSZ8031RNL Key Features
- Single-chip 10Base-T/100Base-TX IEEE 802.3 pliant Ethernet Transceiver
- RMII v1.2 Interface support with 50MHz reference clock output to MAC, and option to input 50MHz reference clock
- RMII back-to-back mode support for 100Mbps copper repeater or media converter
- MDC/MDIO Management Interface for PHY register configuration
- Programmable interrupt output
- LED outputs for link and activity status indication
- On-chip termination resistors for the differential pairs
- Baseline Wander Correction
- HP Auto MDI/MDI-X for reliable detection and correction for straight-through and crossover cables with disable and enabl
- Auto-negotiation to automatically select the highest linkup speed (10/100 Mbps) and duplex (half/full)