Datasheet4U Logo Datasheet4U.com

MIC2550 - Universal Serial Bus Transceiver Advance Information

General Description

The MIC2550 is a single-chip transceiver that complies with the physical layer specifications for Universal Serial Bus (USB).

The MIC2550 supports full-speed (12Mb/s) dual supply voltage operation (patent pending) and low-speed (1.5Mb/s) operation.

Key Features

  • Compliant to USB Specification Revision 1.1 Operation down to 2.5V Dual supply voltage operation Supports full-speed (12Mb/s) and low-speed (1.5Mb/s) operation.
  • Speed-select termination supply.
  • Very low power consumption meets USB suspend-current requirements.
  • Small 14-pin TSSOP.

📥 Download Datasheet

Datasheet Details

Part number MIC2550
Manufacturer Micrel Semiconductor
File Size 82.41 KB
Description Universal Serial Bus Transceiver Advance Information
Datasheet download datasheet MIC2550 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC2505 Single 2A/Dual 1A High-Side Switches Microchip
MIC2506 Single 2A/Dual 1A High-Side Switches Microchip
MIC2536 Dual USB Power Distribution Switch Microchip
MIC2544 Programmable Current-Limit High-Side Switch Microchip
MIC2548 Programmable Current-Limit High-Side Switch Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC2550A Universal Serial Bus Transceiver
MIC2551 USB TRANSCEIVER
MIC2551A USB TRANSCEIVER
MIC2551A-2.5 USB Transceiver
MIC2555 USB - OTG Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC2550 Micrel MIC2550 Universal Serial Bus Transceiver Advance Information General Description The MIC2550 is a single-chip transceiver that complies with the physical layer specifications for Universal Serial Bus (USB). The MIC2550 supports full-speed (12Mb/s) dual supply voltage operation (patent pending) and low-speed (1.5Mb/s) operation. A unique dual supply voltage operation allows the MIC2550 to reference the system I/F I/O signals to a supply voltage down to 2.5V while independently powered by the USB VBUS. This allows the system interface to operate at its core voltage without addition of buffering logic and also reduce system operating current. Features Compliant to USB Specification Revision 1.1 Operation down to 2.