Datasheet4U Logo Datasheet4U.com

MIC2569 - Power Switch

General Description

MIC2569 is designed to supply power to OpenCable™ systems and CableCARD™ hosts.

These CableCARDs are also known as Point of Distribution (POD) cards.

MIC2569 supports both Single and Multiple stream cards through a simple to control parallel interface.

Key Features

  • 110 mΩ maximum VCC on resistance.
  • 400 mΩ maximum VPP on resistance.
  • 3.0V to 3.6V for the 3.3VIN operating range.
  • 3.0V to 5.5V for the 5VIN operating range.
  • 1.3A minimum VCC current limit.
  • 150mA minimum VPP current limit (150mA each).
  • Compact 16-pin QSOP packaging.
  • Operating temperatures from.
  • 40°C to +85°C.
  • Low quiescent current.
  • Soft start turn-on.
  • Break-before-make voltage switching.

📥 Download Datasheet

Datasheet Details

Part number MIC2569
Manufacturer Micrel Semiconductor
File Size 710.45 KB
Description Power Switch
Datasheet download datasheet MIC2569 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC2505 Single 2A/Dual 1A High-Side Switches Microchip
MIC2506 Single 2A/Dual 1A High-Side Switches Microchip
MIC2536 Dual USB Power Distribution Switch Microchip
MIC2544 Programmable Current-Limit High-Side Switch Microchip
MIC2548 Programmable Current-Limit High-Side Switch Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC2560 PCMCIA Card Socket VCC and VPP Switching Matrix
MIC2561 PCMCIA Card Socket Switching Matrix
MIC2562A PCMCIA/CardBus Socket Power Controller
MIC2563A Dual Slot PCMCIA/CardBus Power Controller
MIC2564A Dual Serial PCMCIA/CardBus Power Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC2569 CableCARD™ Power Switch General Description MIC2569 is designed to supply power to OpenCable™ systems and CableCARD™ hosts. These CableCARDs are also known as Point of Distribution (POD) cards. MIC2569 supports both Single and Multiple stream cards through a simple to control parallel interface. All voltage switching is soft-start at turn-on, and break-before-make when changing between different voltage supplies. Built in current limiting protects all VCC and VPP output lines of the host system from card faults and accidental short circuits. MIC2569 provides a FAULT/ signal to indicate an over-current or fault condition exists and is equipped with internal thermal monitoring circuitry to protect the device itself in the event of a sustained over-current condition.