MIC29202 Datasheet | Micrel Semiconductor

Description The MIC2920A family are “bulletproof,” efficient voltage regulators with very low dropout voltage (typically 40m V at light loads and 370m V at 250m A), and very low quiescent current (140µA typical). The quiescent current of the MIC2920A increases only slightly in dropout, prolonging battery life. Key MIC2920A features include protection against reversed battery, fold-back current limiting, and automotive “load dump” protection (60V positive transient). The MIC2920 is available in several configurations. The MIC2920A-x.x devices are three pin fixed voltage regulators available in 3.3V, 4.85V, 5V, and 12V outputs. The MIC29201 is a fixed regulator offering a logic patible ON/OFF (shutdown) input and an error flag output. This flag may also be used as a power-on reset signal. A logic-patible shutdown input is provided on the adjustable MIC29202 which allows the regulator to be switched on and off. The MIC29204 8-pin SOIC adjustable regulator includes both shutdown and error flag pins and may be pin-strapped for 5V output or programmed from 1.24V to 26V using two external resistors. Features - - - - - - - - - - - - High output voltage accuracy Guaranteed 400m A output Low quiescent current Low dropout voltage Extremely tight load and line regulation Very low temperature coefficient Current and thermal limiting Input withstands - 20V reverse battery and 60V positive transients Error flag warns of output dropout Logic-controlled electronic shutdown Output programmable from 1.24V to 26V (MIC29202/MIC29204) Available in TO-220-3, TO-220-5, and surface-mount TO-263-5, SOT-223, and SO-8 packages. Battery-powered equipment Cellular telephones Laptop, notebook, and palmtop puters PCMCIA VCC and VPP regulation/switching Bar code scanners Automotive electronics SMPS post-regulators Voltage reference High-efficiency linear power supplies Applications - - - - - - - - - Pin Configuration OUTPUT 1 SENSE 2 SHUTDOWN 3 GROUND 4 8 INPUT 7 NC 6 NC 5 ERROR 1 2...