Datasheet4U Logo Datasheet4U.com

MIC5013 - Protected High- or Low-Side MOSFET Driver

General Description

The MIC5013 is an 8-pin MOSFET driver with over-current shutdown and a fault flag.

It is designed to drive the gate of an N-channel power MOSFET above the supply rail high-side power switch applications.

Key Features

  • 7V to 32V operation Less than 1µA standby current in the “OFF” state Available in small outline SOIC packages Internal charge pump to drive the gate of an N-channel power FET above supply Internal zener clamp for gate protection 60µs typical turn-on time to 50% gate overdrive Programmable over-current sensing Dynamic current threshold for high in-rush loads Fault output pin indicates current fault.

📥 Download Datasheet

Datasheet Details

Part number MIC5013
Manufacturer Micrel Semiconductor
File Size 153.36 KB
Description Protected High- or Low-Side MOSFET Driver
Datasheet download datasheet MIC5013 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC5060 Ultra Small High-Side MOSFET Driver Micrel
MIC5166 DDR Terminator Microchip
MIC5200 100mA Low-Dropout Regulator Microchip
MIC5202 Dual 100mA Low-Dropout Regulator Microchip
MIC5205 150mA Low-Noise LDO Regulator Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC5010 Full-Featured High- or Low-Side MOSFET Driver
MIC5011 Minimum Parts High- or Low-Side MOSFET Driver
MIC5012 Dual High- or Low-Side MOSFET Driver Not Recommended for New Designs
MIC5014 Low-Cost High- or Low-Side MOSFET Driver
MIC5015 Low-Cost High- or Low-Side MOSFET Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC5013 Micrel MIC5013 Protected High- or Low-Side MOSFET Driver General Description The MIC5013 is an 8-pin MOSFET driver with over-current shutdown and a fault flag. It is designed to drive the gate of an N-channel power MOSFET above the supply rail high-side power switch applications. The MIC5013 is compatible with standard or current-sensing power MOSFETs in both highand low-side driver topologies. The MIC5013 charges a 1nF load in 60µs typical and protects the MOSFET from over-current conditions. The current sense trip point is fully programmable and a dynamic threshold allows high in-rush current loads to be started. A fault pin indicates when the MIC5013 has turned off the FET due to excessive current.