MIC5248 Datasheet | Micrel Semiconductor

Micrel 150m A µCap CMOS LDO Regulator w/Power Good Final Information General Description The MIC5248 is an efficient, precise CMOS voltage regulator with power good output. The MIC5248 offers better than 3% initial accuracy, and constant ground current (typically 100µA) over load. The MIC5248 also works with low-ESR ceramic capacitors, reducing the amount of board space necessary for power applications, critical in handheld wireless devices. Key Features include current limit, thermal shutdown, a pushpull output for faster transient response, and an active clamp to speed up device turnoff. Available in the Itty Bitty™ SOT-23-5 package, the MIC5248 is a fixed 1.2V regulator. Features - - - - - - - - - - Power Good indicator Load independent, ultra-low ground current: 100µA 150m A output current Current limiting Thermal shutdown Tight load and line regulation “Zero” off-mode current Stability with low-ESR capacitors Fast transient response TTL-logic-controlled enable input Applications - Processor power-up sequencing - Laptop, notebook, and palmtop puters - PCMCIA VCC and VPP regulation/switching Ordering Information Part Number MIC5248-1.2BM5 MIC5248-1.2YM5 Marking LV12 KV12 Voltage 1.2 1.2 Junction Temp. Range- - 40°C to +125°C - 40°C to +125°C, Lead-free Package SOT-23-5 SOT-23-5 Other voltages available. Contact Micrel for details. Typical Application 47k VIN MIC5248-x.x BM5 1 2 Enable Shutdown 3 4 5 VOUT COUT PG EN (pin 3) may be connected directly to IN (pin 1). Low-Noise Regulator Application Itty Bitty is a trademark of Micrel, Inc. Micrel, Inc. - 1849 Fortune Drive - San Jose, CA 95131 - USA - tel + 1 (408)...