Datasheet4U Logo Datasheet4U.com

MIC6270 - IttyBitty Comparator Advance Information

General Description

The MIC6270 is a precision voltage comparator with an offset voltage specification of 5mV maximum.

The MIC6270 is designed to operate from a single 2V to 36V power supply.

Operation from split power supplies is also possible.

Key Features

  • an input common-mode voltage range that includes ground. Inputs are protected against reverse polarity (input voltage less than V.
  • ) and ESD. The MIC6270 has an open-collector output that directly interfaces with TTL, CMOS, and other types of logic. Several MIC6270 outputs can be connected together for wired-OR logic. The output also features an internal pull-up current source that can be used instead of an external load in some.

📥 Download Datasheet

Datasheet Details

Part number MIC6270
Manufacturer Micrel Semiconductor
File Size 40.59 KB
Description IttyBitty Comparator Advance Information
Datasheet download datasheet MIC6270 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC61150 Low Input Voltage Single-Supply High-Current LDO MICREL
MIC61300 Low Input Voltage Single-Supply High-Current LDO MICREL
MIC69101 Single Supply VIN / LOW VIN / LOW VOUT / 1A LDO MICREL
MIC69103 Single Supply VIN / LOW VIN / LOW VOUT / 1A LDO MICREL
MIC69151 Single Supply VIN / LOW VIN / LOW VOUT / 1.5A LDO MICREL

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC6211 IttyBitty Operational Amplifier Preliminary Information
MIC6251 IttyBitty GainBlock Amplifiers
MIC6252 IttyBitty GainBlock Amplifiers
MIC6315 Open-Drain uP Reset Circuit
MIC68200 2A Sequencing LDO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC6270 Micrel MIC6270 IttyBitty™ Comparator Advance Information General Description The MIC6270 is a precision voltage comparator with an offset voltage specification of 5mV maximum. The MIC6270 is designed to operate from a single 2V to 36V power supply. Operation from split power supplies is also possible. Its low supply current drain is independent of the magnitude of the supply voltage. This comparator also features an input common-mode voltage range that includes ground. Inputs are protected against reverse polarity (input voltage less than V–) and ESD. The MIC6270 has an open-collector output that directly interfaces with TTL, CMOS, and other types of logic. Several MIC6270 outputs can be connected together for wired-OR logic.