Datasheet4U Logo Datasheet4U.com

MICRF213 - QwikRadio 315MHz Receiver

General Description

The MICRF213 is a general purpose, 3.3V QwikRadio Receiver that operates at 315MHz with typical sensitivity of -110dBm.

The MICRF213 functions as a super-heterodyne receiver for OOK and ASK modulation up to 7.2kbps.

The down-conversion mixer also provides image rejection.

Key Features

  • Up to.
  • 110dBm sensitivity, 1kbps and BER 10E-02 Image Rejection Mixer Frequency from 300MHz to 350MHz Low current consumption: 3.9mA @ 315MHz, continuous on data rates to 7.2kbps (Manchester Encoded) Analog RSSI Output No IF filter required Excellent selectivity and noise rejection Low external part count Ordering Information Part Number MICRF213AYQS Temperature Range.
  • 40° to +105°C Package 16-Pin QS.

📥 Download Datasheet

Datasheet Details

Part number MICRF213
Manufacturer Micrel Semiconductor
File Size 920.30 KB
Description QwikRadio 315MHz Receiver
Datasheet download datasheet MICRF213 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MICRF114 Low-Power Integrated Sub-GHz Wireless RF Transmitter Microchip
MICRORAM Output Ripple Attenuation Module Vicor Corporation
MICROSMD050 Poly Switch PTC Devices Tyco
microSMD190LR Low Rho SMD Littelfuse
microSMD200LR Low Rho SMD Littelfuse

Other Datasheets by Micrel Semiconductor

Part Number Description
MICRF211 QwikRadio 433.92 MHz Receiver
MICRF218 QwikRadio 300 MHz to 450 MHz Receiver
MICRF219 300MHz to 450MHz ASK Receiver
MICRF219A 300MHz to 450MHz ASK/OOK Receiver
MICRF220 3.3V ASK/OOK Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MICRF213 3.3V, QwikRadio® 315MHz Receiver General Description The MICRF213 is a general purpose, 3.3V QwikRadio Receiver that operates at 315MHz with typical sensitivity of -110dBm. The MICRF213 functions as a super-heterodyne receiver for OOK and ASK modulation up to 7.2kbps. The down-conversion mixer also provides image rejection. All post-detection data filtering is provided on the MICRF213. Any one of four filter bandwidths may be selected externally by the user using binary steps (from 1.18kHz to 9.44kHz, Manchester Encoded). The user need only configure the device with a set of easily determined values, based upon data rate, code modulation format, and desired duty-cycle operation.