SY10EP16V Datasheet | Micrel Semiconductor

Micrel 5V/3.3V HIGH-SPEED DIFFERENTIAL RECEIVER ECL Pro™ SY10EP16V SY10EP16V FINAL ECL Pro™ Features s s s s s s s 3.3V and 5V power supply options Bandwidth - 3d B >2.5GHz Internal 75kΩ input pulldown resistor Faster version of SY10EL16V 10K ECL patible I/O Improved output waveform characteristics Available in 8-pin (3mm) MSOP and SOIC packages ECL Pro™ DESCRIPTION The SY10EP16V is a high-speed differential receiver. The device is functionally equivalent to the EL16V devices, with higher performance capabilities. With output transition times significantly faster than the EL16V, the SY10EP16V is ideally suited for interfacing with highfrequency sources. The SY10EP16V provides a V BB output for either single-ended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the SY10EP16V as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to ground via a 0.01µF capacitor. Under open input conditions (pulled to VEE), internal input clamps will force the Q output LOW. PIN CONFIGURATION/BLOCK DIAGRAM NC 1 D 2 /D 3 VBB 4 8 VCC 7 Q 6 /Q 5 VEE .. PIN NAMES Pin D, /D Function ECL Data Inputs ECL Data Outputs Reference Voltage Output Positive Power Supply Negative Power Supply Available in 8-Pin SOIC and MSOP Packages Q, /Q VBB VCC VEE ECL Pro is a trademark of Micrel, Inc. Rev.: C Amendment: /0 Issue Date: March 2003 Micrel ECL Pro™...