Datasheet4U Logo Datasheet4U.com

SY88403BL - CML Low-Power Limiting Post Amplifier

General Description

The SY88403BL is a low-power limiting post amplifier optimized for copper applications.

The device connects to typical transimpedance amplifiers (TIAs).

The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time.

Key Features

  • Multi-rate up to 4.25Gbps operation.
  • 5mVPP input sensitivity.
  • Low noise 50Ω CML data outputs.
  • 800mVpp output swing.
  • 60ps edge rates.
  • 1psRMS typ. random jitter.
  • 10psPP typ. deterministic jitter.
  • Chatter-free Loss-of-Signal (LOS) output.
  • 3.5dB electrical hysteresis.
  • OC-TTL output with internal 4.75kΩ pull-up resistor.
  • Programmable LOS sensitivity using single external resistor.
  • Internal 50Ω.

📥 Download Datasheet

Datasheet Details

Part number SY88403BL
Manufacturer Micrel Semiconductor
File Size 460.60 KB
Description CML Low-Power Limiting Post Amplifier
Datasheet download datasheet SY88403BL Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SY88403BL 3.3V 4.25 Gbps CML Low-Power Limiting Post Amplifier Microchip
SY8843 Ultra Fast Dynamic Response Synchronous Step Down Regulator Silergy
SY8843L Ultra Fast Dynamic Response Synchronous Step Down Regulator Silergy
SY8801 Bluetooth headset smart charging case solution TPS
SY8802 Bluetooth headset smart charging case solution TPS

Other Datasheets by Micrel Semiconductor

Part Number Description
SY88432L 4.25 Gbps Transceiver
SY88022AL 11.3Gbps Laser Diode Driver
SY88022L 11.3Gbps Laser Diode Driver
SY88024L 11.3Gbps VCSEL DRIVER
SY88053AL 12.5Gbps Limiting Post Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SY88403BL 3.3V 4.25Gbps CML Low-Power Limiting Post Amplifier with TTL LOS General Description The SY88403BL is a low-power limiting post amplifier optimized for copper applications. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88403BL quantizes these signals and outputs typically 800mVPP voltage-limited waveforms. The SY88403BL operates from a single +3.3V ±10% power supply, over an industrial temperature range of –40°C to +85°C. With its wide bandwidth and high gain, signals with data rates up to 4.25Gbps and as small as 5mVPP can be amplified to drive devices with CML inputs or AC-coupled PECL inputs.