Datasheet4U Logo Datasheet4U.com

SY88802 - LASER DIODE DRIVER

General Description

The SY88802 is a high speed current switch for driving a semiconductor laser diode in optical transmission applications.

The modulation current (IOUT) is controlled by the current (IRSET) through the external resistor RSET.

Key Features

  • s s s s s s Up to 155Mbps operation Modulation current to 25mA PECL output enable Differential PECL inputs Single 5V power supply Available in a tiny 10-pin (3mm) MSOP.

📥 Download Datasheet

Datasheet Details

Part number SY88802
Manufacturer Micrel Semiconductor
File Size 102.73 KB
Description LASER DIODE DRIVER
Datasheet download datasheet SY88802 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SY8881 1A Synchronous Step Down Regulator Silergy
SY8883 Synchronous Step Down Regulator Silergy
SY8801 Bluetooth headset smart charging case solution TPS
SY8802 Bluetooth headset smart charging case solution TPS
SY8803 Bluetooth headset smart charging case solution TPS

Other Datasheets by Micrel Semiconductor

Part Number Description
SY88803V PECL LOW POWER LIMITING POST AMPLIFIER
SY88822V LASER DIODE DRIVER
SY88823V CML LOW-POWER LIMITING POST AMPLIFIER
SY88843V 3.3V/5V 3.2Gbps CML LOW-POWER LIMITING POST AMPLIFIER
SY88883V CML LOW-POWER LIMITING POST AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Micrel 5V 155Mbps LASER DIODE DRIVER WITH OUTPUT ENABLE SY88802 SY88802 FEATURES s s s s s s Up to 155Mbps operation Modulation current to 25mA PECL output enable Differential PECL inputs Single 5V power supply Available in a tiny 10-pin (3mm) MSOP DESCRIPTION The SY88802 is a high speed current switch for driving a semiconductor laser diode in optical transmission applications. The modulation current (IOUT) is controlled by the current (IRSET) through the external resistor RSET. The output OUT is HIGH and no current flows through OUT when output enable is HIGH. The device incorporates complementary open collector outputs with 25mA maximum current driving capability. The external resistor R EXT must be placed between /OUT and VCC to dissipate the worst case power.