SY88913V Datasheet | Micrel Semiconductor

Micrel, Inc. 5V/3.3V 1.25Gbps HIGH-SPEED LIMITING POST AMPLIFIER SY88S9Y18839V13V Features - 3.3V and 5V power supply options - Up to 1.5Gbps operation - Low power - Low noise - Chatter-Free /LOS Generation - PECL /LOS Output - TTL /EN Input - Differential PECL inputs for data - /EN input is TTL with internal 27K pull up - Single power supply - Designed for use with Micrel-Synergy laser diode driver and controller - Available in a tiny 10-pin (3mm) MSOP DESCRIPTION The SY88913V limiting post amplifier with its high gain and wide bandwidth is ideal for use as a post amplifier in fiber-optic receivers with data rates up to 1.5Gbps. Signals as small as 5m Vp-p can be amplified to drive devices with PECL inputs. The SY88913V generates a chatter-free PECL Loss of Signal (/LOS) output. The SY88913V incorporates a programmble level detect function to identify when the input signal has been lost. This information can be fed back to the /EN input of the device to maintain stability under loss of signal conditions. Using LOSLVL pin the sensitivity of the level detect can be adjusted. The LOSLVL voltage can be set by connecting a resistor divider between VCC and VREF, Figure 2. Figure 3 and 4 show the relationship between input level sensitivity and the voltage set on LOSLVL. APPLICATIONS - 1.25Gbps Gigabit Ethernet - 531Mbps and 1062Mbps Fibre Channel - 622Mbps SONET - Gigabit Interface Converter BLOCK DIAGRAM M9999-071310 hbwhelp@micrel. or (408) 955-1690 Rev.: D Amendment: /0 Issue Date: July 2010 Micrel, Inc. PACKAGE/ORDERING INFORMATION 16-Pin MSOP...