Micrel DSC2011
The DSC2011 series of high performance dual output CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional device functionality. The two CMOS outputs are controlled by separate supply voltages to allow for independent voltage level control. The frequencies of the outputs can be identical or independently derived from a common PLL frequency source.| Part No. | DSC2011 |
|---|---|
| Datasheet | DSC2011 Download |
| Manufacturer |  Micrel |
| Description | Low-Jitter Configurable Dual CMOS Oscillator |
| Buy | Stock & Price |
GENERAL DESCRIPTION
The DSC2011 has provision for up to eight user-defined pre-programmed, pinselectable output frequency combinations. The DSC2011 is also equipped with independent pin-selectable output drive strengths for each output to reduce EMI and noise. DSC2011 is packaged in a 14-pin 3.2x2.5 mm QFN package and available in temperature grades from Ext. Commercial to Automotive. Block DiagramFEATURES
● Low RMS Phase Jitter: <1 ps (typ)● High Stability: ±10, ±25, ±50 ppm
● Wide Temperature Range o Automotive: -55° to 125° C o Ext. Industrial: -40° to 105° C o Industrial: -40° to 85° C o Ext. commercial: -20° to 70° C
● High Supply Noise Rejection: -50 dBc
● Two Independent CMOS Outputs
● Pin-Selectable Configurations o 2-bit Output Drive Strength o 3-bit Output Frequency Combinations
● Short Lead Times: 2 Weeks
● Wide Freq. Range: o CMOS Output: 2.3 to 170 MHz
● Miniature Footprint of 3.2x2.5mm
● Excellent Shock & Vibration Immunity o Qualified to MIL-STD-883
● High Reliability...
