Micrel KS8001
The KS8001 is a 10BASE-T/100BASE-TX/FX Physical Layer Transceiver, operating the core at 1.8 volts to meet low voltage and low power requirements. The solution provides MII/RMII/SMII interfaces to transmit and receive data. Featuring LinkMD cable diagnostics, which allows detection of common cabling plant problems such as open and short circuits, the KS8001 represents a new level of features and performance and is an ideal choice of physical layer transceiver for 100BASE-TX/10BASET/100BASE-FX applications.- Min Voltage : 1.71V
- Max Voltage : 3.465V
- Channels : 1
- Max Operating Temp : 70°C
- Min Operating Temp : 0°C
Source:
Octopart
| Part No. | KS8001 |
|---|---|
| Datasheet | KS8001 Download |
| Manufacturer |  Micrel |
| Description | 3.3V 10/100BASETX/FX Physical Layer Transceiver |
| Buy | Stock & Price |
GENERAL DESCRIPTION
A unique mixed-signal design extends signaling distance while reducing power consumption. HP Auto MDI/MDI-X provides the most robust solution for eliminating the need to differentiate between crossover and straight-through cables.FEATURES
●●
●
●
●
●
●
●
●
● Single chip 100BASE-TX/100BASE-FX/10BASE-T physical layer solution 1.8V CMOS design, power consumption 250 mW Robust (130m+) operation over standard cables Supports Media Independent Interface (MII), Reduced MII (RMII), and Serial MII (SMII) LinkMD feature to determine cable length and diagnose faulty cables up 200 m with +/- 2 m accuracy Supports HP MDI/MDI-X auto crossover Supports power down mode and power saving mode MDC/MDIO to 12.5 MHz for rapid configuration Fully compliant to IEEE 802.3u standard Supports auto-negotiation and manual selection for 10/100Mbps speed and full / half-duplex mode Functional Diagram NRZ/NRZI MLT3 ENCODER 4B/5B ENCODER SCRAMBLER PARALLEL/SERIAL TX+ TX- TRANSMITTER 10/100 PULSE...
