Datasheet4U Logo Datasheet4U.com

MIC2004 - Fixed Current Limit Power Distribution Switch

General Description

MIC2004 and MIC2014 are current limiting, high-side power switches, designed for general purpose power distribution and control in PCs, PDAs, printers and other self-powered systems.

MIC2004 and MIC2014’s primary functions are current limiting and power switching.

Key Features

  • 70mΩ typical on-resistance 2.5V - 5.5V operating range Pre-set current limit values; 0.5A, 0.8A and 1.2A Load discharge FET Kickstart™ Thermal Protection Under voltage lock-out Low quiescent current.

📥 Download Datasheet

Datasheet Details

Part number MIC2004
Manufacturer Micrel
File Size 912.70 KB
Description Fixed Current Limit Power Distribution Switch
Datasheet download datasheet MIC2004 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC2004 Fixed and Adjustable Current Limiting Power Distribution Switches Microchip
MIC2003 (MIC2003 / MIC2013) Current Limiting Circuit Protector Micrel Semiconductor
MIC2003 Fixed and Adjustable Current Limiting Power Distribution Switches Microchip
MIC2005 Fixed and Adjustable Current Limiting Power Distribution Switches Microchip
MIC2005A Fixed and Adjustable Current Limiting Power Distribution Switches Microchip

Other Datasheets by Micrel

Part Number Description
MIC2004 Fixed Current Limit Power Distribution Switch
MIC2185 Low Voltage Synchronous Boost PWM Controller
MIC2194 400kHz SO-8 Buck Controller
MIC2251 High-Efficiency Low EMI Boost Regulator
MIC2253 3.5A 1MHz High Efficiency Boost Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC2004/2014 Fixed Current Limit Power Distribution Switch www.DataSheet4U.com General Description MIC2004 and MIC2014 are current limiting, high-side power switches, designed for general purpose power distribution and control in PCs, PDAs, printers and other self-powered systems. MIC2004 and MIC2014’s primary functions are current limiting and power switching. They are thermally protected and will shutdown should their internal temperature reach unsafe levels, protecting both the device and the load, under high current or fault conditions. MIC2004/2014 feature a load discharge FET which ensures any output capacitance is discharged when the switch is turned off. This is particularly useful in hot-swapping applications where ‘cold’ connections are desired.