Micrel MIC2660
The MIC2660 IttyBitty™ charge pump functions as a lowcurrent, step-up converter where conventional inductor based, dc-to-dc converters are too complex and expensive. This device features a complete, self-contained charge pump in a tiny 5-lead SOT-23-5 package. The MIC2660 is powered from a 3V to 5V nominal supply and produces nominally 5V to 9V as a function of the input voltage.| Part No. | MIC2660 |
|---|---|
| Datasheet | MIC2660 Download |
| Manufacturer |  Micrel |
| Description | IttyBitty Charge Pump |
| Buy | Stock & Price |
GENERAL DESCRIPTION
The output is unregulated and follows a load-line type function. The MIC2660 can be used with or without external components. When used with two noncritical external capacitors, a 3V input will produce 5V at 3.8mA. With no external components, a 3V input will produce 5V at 2.5mA. The MIC2660 charge pump consists of an approximately 18MHz oscillator and a voltage tripler. The MIC2660 is available in the SOT-23-5 package and is rated for –40°C to +85°C ambient temperature range.FEATURES
● 3V input produces approx. 5V unregulated output* 3.8mA with 1µF external output capacitor 2.5mA without external capacitor● 5V input produces approx. 9V unregulated output* 4.5mA output without external capacitor
● CMOS-logic compatible enable
● ESD protected
APPLICATIONS
●●
●
●
●
●
●
● Squib firing Refresh Burst/dump Low duty cycle load LCD bias generator Local 5V logic supply MOSFET driver Battery or solarcell boost Ordering Information Part Number MIC2660BM5 Temperature Range –...
