MIC4415 Datasheet | Micrel Semiconductor

Description The MIC4414 and MIC4415 are low-side MOSFET drivers designed to switch an N-channel enhancement type MOSFET in low-side switch applications. The MIC4414 is a non-inverting driver and the MIC4415 is an inverting driver. These drivers feature short delays and high peak current to produce precise edges and rapid rise and fall times. The MIC4414/15 are powered from a 4.5V to 18V supply and can sink and source peak currents up to 1.5A, switching a 1000p F capacitor in 12ns. The on-state gate drive output voltage is approximately equal to the supply voltage (no internal regulators or clamps). High supply voltages, such as 10V, are appropriate for use with standard N-channel MOSFETs. Low supply voltages, such as 5V, are appropriate for use with many logic-level Nchannel MOSFETs. In a low-side configuration, the driver can control a MOSFET that switches any voltage up to the rating of the MOSFET. The MIC4414 and MIC4415 are available in an ultra-small 4-pin 1.2mm x 1.2mm thin QFN package and is rated for - 40°C to +125°C junction temperature range. Data sheets and support documentation can be found on Micrel’s web site at: .micrel.. Features - Ultra-small 4-pin 1.2mm x 1.2mm thin QFN package - +4.5V to +18V operating supply voltage range - 1.5A peak current - 3.5Ω output resistance at 18V - 9Ω output resistance at 5V - Low steady-state supply current - 77µA control input low - 445µA control input high - 12ns rise and fall times into 1000p F load - MIC4414 (non-inverting) - MIC4415 (inverting) - -40°C to +125°C junction temperature range Applications - Switch mode power supplies - Solenoid drivers - Motor driver Typical Application Micrel Inc. - 2180 Fortune Drive - San Jose, CA 95131 - USA - tel +1 (408) 944-0800 - fax + 1 (408) 474-1000 - http://.micrel. August 2012 M9999-080112-A Micrel, Inc. MIC4414/MIC4415 Ordering Information Part...