Micrel MIC5203
The MIC5203 is a µCap™ 80mA linear voltage regulator with very low dropout voltage (typically 20mV at light loads and 300mV at 80mA) and very low ground current (225µA at 20mA output), offering better than 3% initial accuracy with a logic-compatible enable input. The µCap™ regulator design is optimized to work with lowvalue, low-cost ceramic capacitors. The outputs typically require only 0.47µF of output capacitance for stability.- Min Voltage : 2.5V
- Max Voltage : 16V
- Channels : 1
- Max Operating Temp : 125°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | MIC5203 |
|---|---|
| Datasheet | MIC5203 Download |
| Manufacturer |  Micrel |
| Description | uCap 80mA Low-Dropout Voltage Regulator |
| Buy | Stock & Price |
GENERAL DESCRIPTION
Designed especially for hand-held, battery-powered devices, the MIC5203 can be controlled by a CMOS or TTL compatible logic signal. When disabled, power consumption drops nearly to zero. If on-off control is not required, the enable pin may be tied to the input for 3-terminal operation. The ground current of the MIC5203 increases only slightly in dropout, further prolonging battery life. Key MIC5203 features include current limiting, overtemperature shutdown, and protection against reversed battery. The MIC5203 is available in 2.8V, 3.0V, 3.3V, 3.6V, 3.8V, 4.0V, 4.5V, 4.75V, and 5.0V fixed voltages. Other voltages are available; contact Micrel for details.FEATURES
●●
●
●
●
●
●
●
●
●
●
● Tiny 4-lead and 5-lead surface-mount packages Wide Selection of output voltages Guaranteed 80mA output Low quiescent current Low dropout voltage Tight load and line regulation Low temperature coefficient Current and thermal limiting Reversed input polarity protection Zero off-mode...
