FEATURES
s s s s s s s s s Up to 1.25Gbps operation Low noise Chatter-Free LOS Generation Open Collector TTL LOS Output TTL /EN Input Differential PECL inputs for data Single power supply Designed for use with SY88902 and SY88904 Available in a tiny 10-pin (3mm) MSOP DESCRIPTION
Signals as small as 5mVp-p can be amplified to drive devices with PECL inputs. This information can be fed back to the /EN input of the device to maintain stability under loss of signal conditions. Using LOSLVL pin the sensitivity of the level detect can be adjusted. The LOS LVL voltage can be set by connecting a resistor divider between VCC and VREF, Figure 3. Figure 4 shows the relationship between input level sensitivity and the voltage set on LOSLVL. Figure 5 shows the relationship between input level sensitivity and resistor divider ratio. The LOS output is a TTL open collector output that requires pull-up resistor for proper operation, Figure 1. +5V PIN CONFIGURATION /EN 1 DIN 2 /DIN 3 VREF 4 LOSLVL 5 MSO...
Micrel
