Datasheet4U Logo Datasheet4U.com

ML2330 - Selectable Dual 3V/3.3V/5V 8-Bit DACs

General Description

The ML2330 Selectable Dual 3V/3.3V/5V 8-bit DACs are dual voltage output digital-to-analog converters which can be independently programmed, or powered down to conserve power.

The devices are intended for use in portable or low power 3V systems where space is critical.

Key Features

  • s s s s s s 3V ±10%, 3.3 ±10% or 5V ±10% operation Low supply current (3.5mA max) Individual and full power down (down to 1µA) 10Mb/s three-wire serial interface, compatible to SPI and Microwire 8-pin SOIC package Available in Extended Commercial temperature range (.
  • 20°C to 70°C) and Industrial temperture range (.
  • 40°C to 85°C) Guaranteed monotonicity s BLOCK.

📥 Download Datasheet

Datasheet Details

Part number ML2330
Manufacturer Micro Linear
File Size 210.02 KB
Description Selectable Dual 3V/3.3V/5V 8-Bit DACs
Datasheet download datasheet ML2330 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML2302 Recording and Playback LSI OKI Semiconductor
ML2308 Stereo Recording / Playback LSI OKI Semiconductor
ML237B 6 CHANNEL TOUCH CONTROL INTERFACE ETC
ML23HS0L4350 2 Phase Step Motor MOONS
ML23HS0P4100 2 Phase Step Motor MOONS

Other Datasheets by Micro Linear

Part Number Description
ML2340 Single Supply / Programmable 8-Bit D/A Converters
ML2350 Programmable 8-Bit D/A Converters
ML2003 Logarithmic Gain/Attenuator
ML2008 uP Compatible Logarithmic Gain/Attenuator
ML2009 uP Compatible Logarithmic Gain/Attenuator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
July 2000 ML2330* Selectable Dual 3V/3.3V/5V 8-Bit DACs GENERAL DESCRIPTION The ML2330 Selectable Dual 3V/3.3V/5V 8-bit DACs are dual voltage output digital-to-analog converters which can be independently programmed, or powered down to conserve power. The devices are intended for use in portable or low power 3V systems where space is critical. Programming access to the DACs is provided over a high speed (10Mb/s), 3-wire serial interface which is compatible to the SPI™ and Microwire™ data formats. In addition to independent programming of the DAC output voltages, each device may be powered down, independent of the other DAC, to conserve power. Each DAC draws 2mA maximum quiescent current when operating, and typically less than 1µA when powered down.